How to enlarge printed 2D symbol when using ActiveX

PDF417, Data Matrix, Maxicode, QR Code... 2D bar code formats

How to enlarge printed 2D symbol when using ActiveX

Postby MKaprielian on Wed Sep 02, 2015 7:45 pm

I have successfully added QR codes into MS Access 2010 and can print the QR code.

On my report I would like the size of the QR code to be larger. Even though I have set the properties H and W to be 1 inch and the outline around the QR symbol on my report is that size, the actual QR printed seems to be limited to just under .5 inches.

How can I get the QR code itself to be larger? Is there information in the Manual that would answer this?

Mark
MKaprielian
 
Posts: 2
Joined: Wed Sep 02, 2015 7:36 pm

Re: How to enlarge printed 2D symbol when using ActiveX

Postby glitch on Thu Sep 03, 2015 9:10 am

To increase the physical size of QRCode, increase ModuelSize property. See http://www.morovia.com/manuals/qrcode-f ... ModuleSize
The information above is provided "AS IS", with no warranties, and confers no rights.
User avatar
glitch
Support Engineer
 
Posts: 197
Joined: Wed May 14, 2008 2:42 pm

Re: How to enlarge printed 2D symbol when using ActiveX

Postby MKaprielian on Sat Sep 05, 2015 10:37 pm

Thank you
Mark
MKaprielian
 
Posts: 2
Joined: Wed Sep 02, 2015 7:36 pm


Return to 2D symbologies

Who is online

Users browsing this forum: No registered users and 1 guest